Manualshelf

HP ProLiant DL360 G6 Server MSG

ManualsBrandsHP ManualsServerHP ProLiant DL360 G6 E5540 1P 6GB-R P410i/256 4 SFF 460W PS Base Server
31323334353637383940
Removal and replacement procedures 37
c.
Lift the assembly to unseat the PCI riser boards, and then remove the assembly.
7. Remove all expansion boards ("Expansion boards" on page 37).
To replace the component, reverse the removal procedure.
Expansion boards
To remove the component:
1. Power down the server (on page 23).
2. Extend the server from the rack (on page 24).
3. Remove the access panel ("Access panel" on page 26).
4. Remove the BBWC battery pack, if installed ("BBWC battery pack" on page 35).
5. Remove the air baffle ("Air baffle" on page 36).
6. Remove the PCI riser board assembly ("PCI riser board assembly" on page 36).
7. Remove the expansion board.
To replace the component, reverse the removal procedure.