HP Proliant DL360 G6 Carrier-Grade Server Read Before Install

3. Select the Temperatures tab.
If the temperature thresholds appear as shown below, the switch is set correctly.
Incorrect Thresholds
If the thresholds do not show up correctly, ensure the #10 position was set correctly. If incorrectly
set, reset the system maintenance switch SW1 to the factory defaults as described in the HP
Proliant DL360 G6 Maintenance and Service Guide at the following HP website:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp
After you reset the switch settings to the factory defaults, repeat the procedure above on how to
verify the system maintenance switch setting.
10 Changing the Settings on the System Maintenance Switch