HP ProLiant DL360 Generation 5 Server Maintenance and Service Guide

Removal and replacement procedures 47
4.
Remove the power supply air baffle ("Power supply air baffle" on page 37).
5. Remove the existing memory module.
To replace the component, reverse the removal procedure.
HP Smart Array P400i Controller memory module
To remove the component:
1. Power down the server (on page 27).
2. Extend or remove the server from the rack ("Extend the server from the rack" on page 27, "Remove
the server from the rack" on page 28).
3. Remove the access panel ("Access panel" on page 28).
4. Remove the power supply air baffle ("Power supply air baffle" on page 37).
5. Remove the existing memory module.