HP ProLiant DL360 Generation 5 Server Maintenance and Service Guide

Removal and replacement procedures 45
11.
Remove the T-15 Torx screw that secures the Systems Insight Display.
12. Remove the Systems Insight Display.
To replace the component, reverse the removal procedure.
Integrated HP Smart Array E200i Controller or HP
Smart Array P400i Controller
To remove the component:
1. Power down the server (on page 27).
2. Extend or remove the server from the rack ("Extend the server from the rack" on page 27, "Remove
the server from the rack" on page 28).
3. Remove the access panel ("Access panel" on page 28).
4. Remove the power supply air baffle ("Power supply air baffle" on page 37).