HP ProLiant DL360 Generation 5 Server Maintenance and Service Guide

Removal and replacement procedures 37
To replace the component, reverse the removal procedure.
Power supply air baffle
To remove the component:
1. Power down the server (on page 27).
2. Extend or remove the server from the rack ("Extend the server from the rack" on page 27, "Remove
the server from the rack" on page 28).
3. Remove the access panel ("Access panel" on page 28).
4. Remove the air baffle.
To replace the component, reverse the removal procedure.
Processor air baffle
To remove the component:
1. Power down the server (on page 27).
2. Extend or remove the server from the rack ("Extend the server from the rack" on page 27, "Remove
the server from the rack" on page 28).
3. Remove the access panel ("Access panel" on page 28).