HP ProLiant DL360 Generation 5 Server Maintenance and Service Guide

Removal and replacement procedures 36
5.
Remove any expansion board installed in the assembly.
To replace the component, reverse the removal procedure.
PCI Express riser board
To remove the component:
1. Power down the server (on page 27).
2. Extend or remove the server from the rack ("Extend the server from the rack" on page 27, "Remove
the server from the rack" on page 28).
3. Remove the access panel ("Access panel" on page 28).
4. Remove the PCI riser board assembly ("PCI riser board assembly" on page 34).
5. Remove all expansion boards. ("PCI-X or PCI Express expansion board" on page 35)
6. Remove the full-length PCI Express riser board from the riser board assembly.