HP ProLiant DL360 Generation 4p Server Maintenance and Service Guide

Removal and replacement procedures 33

Install the processor and close the processor locking lever and processor retaining clips.

4. Rotate the baffle into position

5. Install the access panel ("Extending the server from the rack" on page 12, "Access panel" on page

14).

Battery

If the server no longer automatically displays the correct date and time, you may need to replace the

battery that provides power to the real-time clock. Under normal use, battery life is 5 to 10 years.

WARNING: The computer contains an internal lithium manganese dioxide, a vanadium

pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack

is not properly handled. To reduce the risk of personal injury:

• Do not attempt to recharge the battery.

• Do not expose the battery to temperatures higher than 60°C (140°F).

• Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or

water.

• Replace only with the spare designated for this product.

1. Power down the server (on page 12).

2. Extend or remove the server from the rack ("Extending the server from the rack" on page 12).

3. Remove the access panel ("Access panel" on page 14).

4. Remove the PCI riser cage ("PCI riser board assembly" on page 24).

CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all

AC power cords before removing or installing the expansion boards.