HP ProLiant DL360 Generation 4p Server Maintenance and Service Guide

Removal and replacement procedures 21
3.
Press the power supply release lever, then pull the power supply from the server.
To replace the component, reverse the removal procedure.
Power supply fan assembly
CAUTION: Do not operate the server for long periods with the access panel open or removed. Operating
the server in this manner results in improper airflow and improper cooling that can lead to thermal damage.
1. Power down the server (on page 12).
2. Extend or remove the server from the rack ("Extending the server from the rack" on page 12).
3. Remove the access panel ("Access panel" on page 14).
4. On models equipped with SATA drives, remove the SATA cable from the cable clip. For cable
locations, refer to the SATA cable routing information ("SATA cable routing" on page 37).
5. Press the latches and lift to release the power supply fan assembly from the server.
6. Remove the component from the server.