HP ProLiant DL360 Generation 4p Server Maintenance and Service Guide

Removal and replacement procedures 14
To open the arm:
To close the arm:
Access panel
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and
the internal system components to cool before touching them.
CAUTION: Do not operate the server for long periods with the access panel open or removed. Operating
the server in this manner results in improper airflow and improper cooling that can lead to thermal damage.
1. To remove the component:
2. Power down the server if the standard cable management solution is installed ("Power down the
server" on page 12).
NOTE: If the optional cable management arm is installed, you can extend the server and perform hot-plug
installation or maintenance procedures without powering down the server.
3. Extend the server from the rack, if applicable ("Extending the server from the rack" on page 12).