ProLiant Server High-Density Deployment Server Solution

Rack Management Systems
To determine the best rack management solution, consider the service and upgrade demands of the
servers deployed in the rack.
Universal Sliding Rack Rails
The Universal Sliding Rack Rails and optional cable management solution enable in-rack servicing
and provide convenient access to the server cables and connectors. With this solution, a server can
be powered down and serviced without disconnecting the server cables or removing the server from
the rack. The low friction sliding rack rails are designed for either square- or round-hole racks. The
sliding rack rails compress and snap securely in place in the rack without screws or nuts. This solution
fits either HP ProLiant or third-party racks. Velcro ties, provided with each server, secure the cables
away from the rear of the server.
Telco Rack Solution
The telco rack solution is available as part number 1UKIT-009 from http://racksolutions.com
. This kit
provides the components necessary to mount two servers.
Cable Management Solution
The optional cable management solution is designed for use with the adjustable-depth rack rail
mechanism for either square- or round-hole racks. This solution fits either HP ProLiant or third-party
racks.
The optional cable management arm attaches directly onto the rear of the rack rail. The arm can be
mounted on either side of the rack. It secures and routes the power, network, and KVM cables along
the rear of the rack.
When a server is extended from the front of the rack for servicing, the cable arm extends as well. This
not only prevents the cables from sagging and tangling with the server in the rack, it also enables
proper air ventilation through the rack while enabling full extension of the servers from the rack
without disconnecting any of the server cables.
Refer to the HP ProLiant DL360 Generation 4 Reference and Troubleshooting Guide for complete
installation instructions.
13