ProLiant DL360 Generation 2 Server Maintenance and Service Guide

Removal and Replacement Procedures
Compaq ProLiant DL360 Generation 2 Server Maintenance and Service Guide 2-39
COMPAQ CONFIDENTIAL Codename: Maisto Part Number: 233831-001 Last Saved On: 12/12/01 3:47 PM
To remove the system board battery:
1. Power down the server. See “Powering Down the Server” in this chapter.
2. Remove the server from the rack. See “Removing the Server from the Rack” in this
chapter.
3. Remove the access panel. See “Server Access Panel” in this chapter.
4. Locate the battery holder on the system board
.
Figure 2-33: Battery location
5. Push the battery security clip away from the center of the holder and remove the
battery
.
1
2
Figure 2-34: Removing the battery
Reverse steps 1 through 5 to replace the battery.