ProLiant DL360 Generation 2 Server Maintenance and Service Guide

Removal and Replacement Procedures
Compaq ProLiant DL360 Generation 2 Server Maintenance and Service Guide 2-35
COMPAQ CONFIDENTIAL Codename: Maisto Part Number: 233831-001 Last Saved On: 12/12/01 3:47 PM
To remove a processor:
1. Power down the server. See “Powering Down the Server” in this chapter.
2. Remove the server from the rack. See “Removing the Server from the Rack” in this
chapter.
3. Remove the access panel. See “Server Access Panel” in this chapter.
4. Push down on the integrated heatsink-retaining clip
and release it from the retaining
tab on the processor socket
.
5. Remove the heatsink and integrated thermal pad from the processor
.
6. Lift the processor locking lever
.
7. Lift the processor from the socket
.
3
4
5
2
1
Figure 2-31: Removing the processor