ProLiant DL360 Generation 2 Server Maintenance and Service Guide

Removal and Replacement Procedures
2-22 Compaq ProLiant DL360 Generation 2 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: Maisto Part Number: 233831-001 Last Saved On: 12/12/01 3:47 PM
Air Baffle
To remove the air baffle:
1. Power down the server. See “Powering Down the Server” earlier in this chapter.
2. Remove the server from the rack. See “Removing the Server from the Rack” in this
chapter.
3. Remove the access panel. See “Server Access Panel” earlier in this chapter.
4. Remove the PCI riser board assembly. See “PCI Riser Board Assembly” in this chapter.
CAUTION: Always remove the PCI riser board assembly before removing the air baffle.
Failure to remove the assembly may result in damage to expansion boards.
5. Remove the air baffle by lifting it straight up from the system board.
Figure 2-18: Removing the air baffle
Reverse steps 1 through 5 to replace the air baffle.