ProLiant DL360 Generation 2 Server Maintenance and Service Guide

Removal and Replacement Procedures
2-18 Compaq ProLiant DL360 Generation 2 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: Maisto Part Number: 233831-001 Last Saved On: 12/12/01 3:47 PM
PCI Riser Board Assembly
To remove the PCI riser board assembly:
1. Power down the server. See “Powering Down the Server” earlier in this chapter.
2. Remove the server from the rack. See “Removing the Server from the Rack” in this
chapter.
3. Remove the access panel. See “Server Access Panel” earlier in this chapter.
4. Disconnect any cables leading from any current expansion boards to the system board.
5. Lift the expansion board retaining lever.
Figure 2-14: Lifting the expansion board retaining lever (expansion
boards removed for clarity)