ProLiant DL360 G2 Server High-Density Deployment

ProLiant DL360 G2 Server High-Density Deployment 17
Power Cords
The ProLiant DL360 G2 server ships with an IEC-IEC power cord (PN 142257-002) used for
rack mounting with high voltage Power Distribution Units (PDUs). For low voltage, stand-alone
deployments or installation without a rack, country-specific power cord options are available.
U.S. & Japan models will ship with two power cords - IEC-IEC and country-specific cord:
• Power cord, US, IEC320-C13 to IEC320-C14, 10 A 250 V, Straight (10 ft / 2.5 meter)
(PN 142257-002)
• Power cord, US, IEC320-C13 to NEMA 5–15P, 15 A 125 V, Straight (10 ft / 3 meter)
(PN 103541-001)
High-Voltage Y-Cables
The Vertical-Mount PDU Bracket with a High-Voltage Cables kit includes 11 Y-cables, each of
which is 3.0 m (10 ft) long. The single-cord PDU section is 1.8 m (6 ft) long, and the dual-cord
server section is 1.3 m (4 ft) long. See Table 9 for part numbers.
Note: You do not need the Vertical-Mount PDU Bracket to mount any of the PDUs listed in
Table 9; however, the Y-cables shipped with this kit may be used with the PDUs.
Y-cables have a single-cord section with an IEC connector that connects to the PDU, a dividing
joint in the center, and a dual-cord section with IEC connectors that connect to the servers. One
Y-cable supplies power from the PDU to two ProLiant DL360 G2 servers in the standard
configuration.
CAUTION: When installing server power cords into the PDUs, ensure that the load is
balanced among the output circuit breakers. Do not exceed the ratings of the circuit
breakers.
Table 10. Compaq High-Voltage Power Cables
Description Compaq Part # Description
Vertical-Mount PDU Bracket with High-
voltage Cables kit
166097-B21 This kit includes two sets of PDU brackets and 11 Y-
cables. Each cable is 10-ft long with a 6-ft section on
the single-side and 4-ft sections on the dual-side.
10A IEC-to-IEC Cables kit
142257-001 (6 ft)
142257-002 (8 ft)
142257-003(10 ft)
142257-006(4.5ft)
142257-007(4.5ft)
kit of 15 cables
The IEC-to-IEC cables can be used either as individual
power cords for the server or to extend the length of the
high-voltage Y-cables. The cables are available in six-,
eight-, and ten-foot lengths. The ProLiant DL360 G2
Server ships with one 10-ft IEC to IEC cable, part
number 142257-003.
Console Management Systems
A console management system enables a single keyboard and video console to control multiple
servers. Install an in-rack console management system in the same rack with the servers it
manages. Install an off-rack console management system in the local vicinity of the rack of
servers it manages. Use a remote console management system to manage a rack of servers from
any other system connected to the same network.
1713-0702A-WWEN