Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide

4-4 Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Ed Giblin Project: Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 233832-001 File Name: e-ch4 Server Installation.doc Last Saved On: 8/31/01 11:42 AM
Figure 4-2. Attaching the template to the front of the rack
5. Proceed with attaching of the universal rack rails.
Attaching Universal Rack Rails to the Rack
To attach the universal rack rails to the rack:
1. Complete the procedures for measuring with the template. See
“Measuring with the Template” earlier in this chapter.
2. The sliding rail-lock, on the inside rear of the universal rack rail, must
be in the ‘release’ position to adjust the slide for appropriate rack depth
. Figure 4-3.
3. To adjust the length of the rail, press the extension release latch
.