Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide

3-28 Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Ed Giblin Project: Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 233832-001 File Name: d-ch3 Installing Hardware Options.doc Last Saved On: 8/31/01 11:44 AM
2
1
Figure 3-23. Inserting an expansion board into expansion slot 2
9. Replace the PCI riser board assembly:
a. Align the assembly with the rear and outside edge of the server.
b. Lower the assembly into the chassis
, allowing the assembly to lie
flat against the bottom of the server.
1
1
Figure 3-24. Replacing the PCI riser board assembly
c. Slide the assembly toward the center of the server until it engages
the mounting posts
. Ensure that the assembly engages the posts
securely.