Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide

Compaq Confidential – Need to Know Required
Writer: Ed Giblin Project: Compaq ProLiant DL360 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 233832-001 File Name: d-ch3 Installing Hardware Options.doc Last Saved On: 8/31/01 11:44 AM
Chapter 3
Installing Hardware Options
If there are no options to be installed in the server, proceed to Chapter 4,
“Server Installation”.
This chapter provides information and procedures for installing hardware
options on Compaq ProLiant DL360 G2 servers. For complete instructions,
refer to the installation documentation shipped with each option kit. Refer to
the following items for an illustrated guide to installing Compaq options:
■ Hardware installation and configuration poster shipped with the server
■ Labels attached to the inside of the system unit access panel
To streamline the installation process, read the installation instructions for all
of the hardware options and identify similar steps prior to installing the
hardware options.
After all hardware options have been installed, proceed with the server
installation procedures in Chapter 4, “Server Installation.”
If any problems are encountered during installation, contact your Compaq
authorized reseller.
WARNINGS: To reduce the risk of personal injury or damage to the equipment:
■ Heed all warnings and cautions throughout the installation instructions.
■ Allow internal system components to cool before touching any surfaces.
■ Ensure that the power to the server is turned off and that the AC power
cord is disconnected before removing the access panel.