HP ProLiant Storage Server User Guide (440584-001, February 2007)

Figure 2 HP Storage Server Management console

Using the Remote Desktop method

Remote Desktop provides the ability for you to log onto and remotely administer your server, giving you a

method of managing it from any client. Installed for remote administration, Remote Desktop allows only

two concurrent sessions. Leaving a session running takes up one license and can affect other users. If

two sessions are running, additional users will be denied access.

To connect th e storage server to a network using the Remote Desktop m e t hod

1. On the PC client, select Star t > Run.AtOpen,typemstsc,thenclickOK.

2. Enter the serial number of the storag e ser ver followed by a hyphen (-) in the Computer box and

click Connect. F or example: D405 9ABC3433-.

NOTE:

If you are able to determine the IP address from your DHCP server, you can substitute the IP

address for the serial num ber and hyphen (-). For example: 192.100.0.1.

3. Log on to the HP ProLiant Storage Server with the default user name administrator and the

password hpinvent.

The HP ProLiant Data Protection Storage Server Management console and Rapid Startup Wizard

will start automatically.

NOTE:

You can change the administrator name and password when you conﬁgure the server

using the "Rapid Startup Wizard"onpage26.

4. To complete net work conﬁguration using the Rapid Startup Wizard, see " Conﬁguring the ser ver on

the network"onpage25.

Installing and conﬁguring the server