HP ProLiant Storage Server User Guide (440584-001, February 2007)

3. Scroll down to locate the Ac tiveX Controls and plug-ins settings.

4. At Download signed Ac tiveX c ontrols settings, select Enable to enable ActiveX or Prompt to launch a

notice requiring approval before ActiveX is enable d.

5. Click OK to close the Security Settings dialog b ox.

6. If prompted Are you sure you want to change th e security settings for t his zone,clickYES.

7. On the Internet Options dialog box, click OK to ﬁnish.

Toconnectthestorageservertoanetworkusingtheremotebrowsermethod

1. On the remote client machine open Internet E xplorer and enter https:// and the serial

number of the storage ser ver followed by a hyphen (-), and then:3202. For example,

https://D4059ABC3433-:3202 Press Enter.

NOTE:

If you are able to determine the IP address from your DHCP server, you can substitute the IP

address for the serial number and hyphen (-). For example: 192.1 00.0.1:3202.

2. Click OK on the Se curity Alert prompt.

3. Log on to the HP ProLiant Storage Server Management console with the default user name

administrator and the password hpinvent.

NOTE:

You can change the administrator name and password when you conﬁgure the server

using the "Rapid Startup Wizard"onpage26.

4. To complete network conﬁguration using the Rapid Startup Wizard, see "Conﬁguring the server on

the network"onpage25.

IMPORTA

NT:

If you are

using the remote browser method to access the HP Storage Serv e r Management console and

Rapid St

artup Wizard, always close the remote session before closing your Internet browser. Closing

theInternetbrowserdoesnotclosetheremotesession.Failuretocloseyourremotesessionimpactsthe

limited number of remote sessions allowed on the storage server at any given time.

Connecting to the storage server permits you to access the HP Storage Server M anag em ent console

(Figure 2). From the console, you can access snap-ins that allow complete server system management.

HP ProLiant Storage Server 21