HP ProLiant Storage Server User Guide (440584-001, February 2007)

NOTE:

You can change the administrator name and password when you conﬁgure the server

using the "Rapid Startup Wizard"onpage26.

2. To complete net work conﬁguration using the Rapid Startup Wizard, see " Conﬁguring the ser ver on

the network"onpage25.

Using the remote browser method

The storage server ships with DHCP enabled on the net work port. If the server is placed on a

DHCP-enabled network and the serial number of the d evice is known, the server can be accessed through

a client running Internet E xplorer 5.5 (or later) on that network, using the TCP/IP 3202 port.

IMPORTANT:

Before you begin this procedure, ensur e that you have the following:

• Windows-based PC loaded with Internet Explorer 5.5 (or later) on the same local network as the

storage server

• DHCP-enabled network

• Serial number or IP address of the storage server

To connect the server to a network using the remote browser method, you must ﬁrst ensure that the client

is conﬁgured to download signed ActiveX controls.

To enable ActiveX controls

1. On the remote client m achine, o pen the Internet Explorer web browser and select Tools > Internet

Options > Security.

Figure 1 Internet options sc reen

2. On th

e Se curity screen, select Internet or Local intranet Web content zone, then click Custom Level.

Installing and conﬁguring the server