ProLiant DL320 Setup and Installation Guide

Installing the Server 4-11
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant DL320 Setup and Installation Guide Comments:
Part Number: 203836-001 File Name: e-ch4 Installing the Server.doc Last Saved On: 8/23/00 4:07 PM
4. Insert the server into the rack, ensuring that the fixed server rails slide
inside the fixed rack rails.
CAUTION: Keep the server parallel to the floor when sliding the fixed server
rails into the slide rails. Tilting the server can damage the rails.
5. Slide the server fully into the rack.
6. Position the front panel thumbscrews through the holes on both sides of
the rack and into the round, threaded holes in the front of the fixed rack
rail.
7. Tighten the thumbscrews by turning them clockwise.
8. At the rear of the rack, fasten the server thumbscrew that secures the
fixed cable tray to the server.
Figure 4-9. Fastening the cable tray to the server
After installing the server in the rack, you are ready to begin the procedure for
“Connecting the Power Cord and Peripheral Devices.”