ProLiant DL320 Setup and Installation Guide

Installing the Server 4-5
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant DL320 Setup and Installation Guide Comments:
Part Number: 203836-001 File Name: e-ch4 Installing the Server.doc Last Saved On: 8/23/00 4:07 PM
4. Using a pencil, mark the locations on the rack where the fixed rack
rail tabs will be inserted.
5. On the rack, mark the top and bottom edges of the template . This step
helps you align a template for the next component.
2
1
1
2
Figure 4-2. Marking the rack for server installation
6. Move to the rear of the rack, and turn the template over so you can use
the backside of the template.
7. Repeat steps 2 through 5 with the back of the template on the rear of the
rack.
8. After marking the front and rear of the rack, remove the template from
the rack. Attach the fixed rack rails to the rack. See the following
subsection, “Attaching the Fixed Rack Rails to the Rack.”