ProLiant DL320 Setup and Installation Guide

3-50 Compaq ProLiant DL320 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant DL320 Setup and Installation Guide Comments:
Part Number: 203836-001 File Name: d-ch3 Installing Hardware Options.doc Last Saved On: 8/23/00 4:00 PM
13. Install your Smart Array Controller in the PCI expansion slot by
performing the following steps:
a. Remove the expansion slot cover. See “Removing the Expansion
Slot Cover” earlier in this chapter.
Figure 3-44. Removing the expansion slot cover
b. Install the Smart Array controller by aligning the board with the
guiding groove and sliding it into the slot until it seats firmly.
Figure 3-45. Installing the array controller expansion board into the PCI riser
board assembly
14. Install the PCI riser board assembly: