ProLiant DL320 Setup and Installation Guide

3-46 Compaq ProLiant DL320 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant DL320 Setup and Installation Guide Comments:
Part Number: 203836-001 File Name: d-ch3 Installing Hardware Options.doc Last Saved On: 8/23/00 4:00 PM
11. Connect the SCSI cable to the array controller in the PCI expansion slot.
Figure 3-41. Connecting the SCSI cable to the array controller
12. Install the access panel. See “Installing the Access Panel” earlier in this
chapter.
13. Install the server in the rack. See “Inserting the Server into the Rack” in
Chapter 4, “Installing the Server.”
14. Configure any devices attached to the array controller. Refer to the
documentation that ships with your array controller.
15. Power up the server. See “Powering up the Server” in Chapter 4,
“Installing the Server.”
16. Rebuild the data on your internal hard drives with the backup data from
Step 1.
17. Resume normal server operations.