ProLiant DL320 Setup and Installation Guide

3-44 Compaq ProLiant DL320 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant DL320 Setup and Installation Guide Comments:
Part Number: 203836-001 File Name: d-ch3 Installing Hardware Options.doc Last Saved On: 8/23/00 4:00 PM
8. Remove the expansion slot cover. See “Removing the Expansion Slot
Cover” earlier in this chapter.
Figure 3-37. Removing the expansion slot cover
9. Install the array controller expansion board into the PCI riser board
assembly by aligning the expansion board with the guiding groove and
sliding the expansion board into the slot until the board seats firmly.
Figure 3-38. Installing the array controller expansion board into the PCI riser
board assembly
10. Install the PCI riser board assembly by performing the following steps:
a. Lay the PCI riser board assembly in the chassis, and ensure that the
system power cable is clear of the PCI riser board thumbscrew plate.