ProLiant DL320 Setup and Installation Guide

Installing Hardware Options 3-39
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant DL320 Setup and Installation Guide Comments:
Part Number: 203836-001 File Name: d-ch3 Installing Hardware Options.doc Last Saved On: 8/23/00 4:00 PM
7. Remove the tray by performing the following steps:
a. Loosen the thumbscrew securing the hard drive trays to the
chassis.
b. Slide the tray toward the rear of the server and lift .
1
2
Figure 3-32. Removing the hard drive tray for SCSI ID 0
IMPORTANT: ProLiant DL320 servers for SCSI hard drive users ship with the SCSI cable
already installed. The controller end of the cable is threaded through the opening in the
center wall and connected to the SCSI module, while the cable’s device connectors lay in
the hard drive bay.