ProLiant DL320 Setup and Installation Guide

Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant DL320 Setup and Installation Guide Comments:
Part Number: 203836-001 File Name: d-ch3 Installing Hardware Options.doc Last Saved On: 8/23/00 4:00 PM
Chapter 3
Installing Hardware Options
This chapter provides information and procedures for installing hardware
options on ProLiant DL320 servers. For complete instructions, refer to the
installation documentation shipped with each option kit. Refer to the following
items for an illustrated guide to installing Compaq option upgrades:
■ Hardware installation and configuration poster shipped with your server
■ Labels attached to the inside of the system unit access panel
To streamline the installation process, read the installation instructions for all
of the hardware options, and identify similar steps before installing the
hardware options.
After you install hardware options, proceed with the server installation
procedures in Chapter 4, “Installing the Server.”
If you encounter any problems during installation, contact your Compaq
authorized reseller.
WARNINGS: To reduce the risk of personal injury or damage to the equipment:
■ Heed all warnings and cautions throughout the installation instructions.
■ Allow internal system components to cool before touching any surfaces.
■ Ensure that the power to the server is turned off and that the AC power
cord is disconnected before removing the access panel.