ProLiant DL320 Setup and Installation Guide

7-2 Compaq ProLiant DL320 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant DL320 Setup and Installation Guide Comments:
Part Number: 203836-001 File Name: h-ch7 Integrated Management Log.doc Last Saved On: 8/23/00 4:14 PM
Compaq Insight Manager
Compaq Insight Manager is a server management tool that provides in-depth
fault, configuration, and performance monitoring of hundreds of Compaq
servers from a single management console. The system parameters that are
monitored describe the status of all key server components. By viewing the
events that may occur to these components, you can take immediate action.
You can view and print the event list from within Compaq Insight Manager by
following the instructions in the following subsection. You can also mark a
critical or caution event as repaired after the affected component has been
replaced. For example, when a failed fan has been replaced, you can mark the
event as repaired, which lowers the severity of the event.
NOTE: You can only view the list from the Recovery/Integrated Management Log screen,
as described above. To print the list, follow the instructions in “Viewing the Event List.”
Viewing the Event List
To view the event list, follow these instructions:
1. From the Compaq Insight Manager, select the appropriate server in the
network.
2. Select the View Device Data option. The selected server is displayed
with buttons around its perimeter.
3. Select Recovery.
4. Select the Compaq Integrated Management Log option.
5. If a failed component has been replaced, select the event from the list.
6. Select the Mark Repaired option to update and log the event.
Printing the Event List
Perform the following steps to view the event list:
1. From the Compaq Insight Manager, select the appropriate server. The
selected server is displayed with buttons around its perimeter.
2. Select Configuration.
3. Select Recovery.
4. Select Print.