ProLiant DL320 Setup and Installation Guide

6-10 Compaq ProLiant DL320 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant DL320 Setup and Installation Guide Comments:
Part Number: 203836-001 File Name: g-ch6 Server Configuration and Utilities.doc Last Saved On: 8/24/00 6:07 PM
Installing Survey
Installing Survey with SmartStart Installation
To install the Compaq Survey Utility through the SmartStart Setup process,
refer to the SmartStart Installation Poster. This method installs an operating
system and Compaq products on a server.
CAUTION: Do not use this method to add the Compaq Survey Utility to an
existing system.
Installing Survey from Compaq Management CD
To install the Compaq Survey Utility from the Compaq Management CD on a
Windows NT server, you must be logged on to the Windows NT server and
have administrator access rights. Once you are logged on, enter the following
at the Windows NT command prompt:
[CD-ROM DRIVE]:\Survey\Win-NT\Eng\Survey -i -c
If the target server does not have a CD drive, use Diskette Builder to create
Survey utility diskettes.
Running Survey
Once the Compaq Survey Utility is installed, by default it gathers information
every Wednesday at noon and at every power-up. You can use command line
parameters to change the Compaq Survey Utility data-gathering interval. You
can also force a one-time, immediate collection by entering the following at
the Windows NT command prompt: Survey
Compaq Diagnostic Utility
The Compaq Diagnostic Utility is run from a diskette created from the
SmartStart CD. To run Diagnostics, insert the Diagnostics diskette and restart
the server. The server powers up from the diskette and runs the Diagnostics
Utility.