ProLiant DL320 Setup and Installation Guide

Cabling Guidelines 5-3
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant DL320 Setup and Installation Guide Comments:
Part Number: 203836-001 File Name: f-ch5 Cabling Guidelines.doc Last Saved On: 8/22/00 7:57 PM
SCSI Hard Drives from a SCSI Module
The shipping configuration for your SCSI-model ProLiant DL320 server
already contains the internal cabling required for operating internal SCSI hard
drives. The SCSI cable
connects directly to the SCSI drive connector on the
SCSI module
on the system board.
1 2
Figure 5-2. SCSI cable connected properly to the SCSI module on the system
board (center wall and PCI riser board assembly removed for clarity)
This cable does not ship in ProLiant DL320 servers for ATA hard drives. You
can purchase a SCSI hard drive option kit and a SCSI cable from a Compaq
authorized reseller via the Compaq website:
http://www.compaq.com