ProLiant DL320 Setup and Installation Guide

4-16 Compaq ProLiant DL320 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant DL320 Setup and Installation Guide Comments:
Part Number: 203836-001 File Name: e-ch4 Installing the Server.doc Last Saved On: 8/23/00 4:07 PM
Use the following procedures to power up the server:
1. To power up the server, press the Power On/Off switch.
Figure 4-13. Powering up the server
2. Use the LED information in the following table to identify a successful
power-on sequence.
After the server has successfully powered on, you can begin the configuration
process. See Chapter 6, “Server Configuration and Utilities.”
If your server does not power on successfully, or if it indicates a fault, see
Appendix E, “Troubleshooting.”