ProLiant DL320 Setup and Installation Guide

4-12 Compaq ProLiant DL320 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant DL320 Setup and Installation Guide Comments:
Part Number: 203836-001 File Name: e-ch4 Installing the Server.doc Last Saved On: 8/23/00 4:07 PM
Connecting the Power Cord and
Peripheral Devices
After you attach the fixed cable tray, you can connect the power cord and
peripheral devices to the connectors located on the rear panel of the server.
Icons on the back of the server identify the function of each connector.
WARNING: To reduce the risk of electrical shock or fire, do not plug
telecommunications/telephone connectors into the NIC connectors.
CAUTION: If the Remote Insight Lights-Out Edition is installed in your server,
ensure that you connect your video cable into the video connector on the rear of
the Remote Insight Lights-Out Edition. The standard video connector on the
server rear panel is not used when the Remote Insight Lights-Out Edition is
installed. For more information, see the documentation that ships with this
option.
Use the following figure and table to identify connectors, and follow the
connection order to attach your cables and power cord. The location numbers
in the figure and table correspond to the connection order for the peripheral
cables and power cord.
1 32 5
4
6
7
89
10
Figure 4-10. Rear panel connectors on the ProLiant DL320 server