ProLiant DL320 Server Maintenance and Service Guide

Removal and Replacement Procedures
Compaq ProLiant 320 Server Maintenance and Service Guide 2-37
COMPAQ CONFIDENTIAL Codename: DarkStar-T Part Number: 203834-003 Last Saved On: 12/28/01 9:29 AM
CD-ROM (DVD-ROM)/Diskette Drive Assembly Cable
To remove the CD-ROM (DVD-ROM)/diskette drive assembly cable:
1. Power down the server. See “Powering Down the Server” in this chapter.
2. Remove the access panel. See “Access Panel” in this chapter.
3. Remove the PCI riser board assembly. See “PCI Riser Board Assembly” in this chapter.
4. Remove the center wall. See “Center Wall” in this chapter.
5. Disconnect the CD-ROM (DVD-ROM)/diskette drive assembly cable from the CD-
ROM(DVD-ROM)/diskette drive assembly backplane
.
6. Disconnect the CD-ROM (DVD-ROM)/diskette drive assembly cable from the system
board
.
1
2
Figure 2-31: Disconnecting the CD-ROM (DVD-ROM)/diskette drive
assembly cable
Reverse steps 1 through 5 to replace the CD-ROM DVD-ROM)/diskette drive assembly
cable.