ProLiant DL320 Server Maintenance and Service Guide

Removal and Replacement Procedures
2-34 Compaq ProLiant 320 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: DarkStar-T Part Number: 203834-003 Last Saved On: 12/28/01 9:29 AM
Fans 4 and 5
To remove fan 5:
1. Power down the server. See “Powering Down the Server” in this chapter.
2. Remove the access panel. See “Access Panel” in this chapter.
3. Disconnect the fan cable from the fan connector on the system board
.
4. Remove the two Phillips-head screws that secure the fan in the chassis
.
5. Lift and remove the fan
.
1
2
3
2
Figure 2-28: Removing fan 5 from the server
6. Repeat steps 1 through 5 to remove fan 4, if needed.
Reverse steps 1 through 6 to replace fans 4 and 5.