ProLiant DL320 Server Maintenance and Service Guide

Removal and Replacement Procedures
Compaq ProLiant 320 Server Maintenance and Service Guide 2-11
COMPAQ CONFIDENTIAL Codename: DarkStar-T Part Number: 203834-003 Last Saved On: 12/28/01 9:29 AM
Shipping/Ejector Key
Compaq ProLiant DL320 servers include a shipping/ejector key that secures the
CD-ROM/diskette drive assembly, the DVD-ROM/diskette drive assembly or the bezel blank
during shipping. This key should be removed before server deployment. The key is also used
to eject an assembly or the blank.
CAUTION: Always install the shipping/ejector key in its storage location inside the chassis
before shipping the server. Failure to do so can result in damage to the CD-ROM (DVD-
ROM)/diskette drive assembly.
To remove the shipping/ejector key:
1. Power down the server. See “Powering Down the Server” in this chapter.
2. Remove the access panel. See “Access Panel” in this chapter.
3. Identify and lift the shipping/ejector key from its storage location.
Figure 2-5: Removing the shipping/ejector key
Reverse steps 1 through 3 to replace the shipping/ejector key.