Compaq ProLiant DL320 Ultra-Dense Server Deployment in Compaq Racks

Compaq ProLiant DL320 Ultra-Dense Server Deployment in Compaq Racks 6
13AS-0900A-WWEN
The section titled “Planning Rack Configurations” provides weight information for individual
rack components to help address floor support requirements. It also describes cable and console
management systems.
All discussions of power requirements for ProLiant DL320 servers are based on the input power
of the server. For calculation purposes, this document uses the maximum rated power supply
input of 200 watts. However, derating the input power is effective for the following reasons:
• To minimize the number of PDUs required for each rack
• To match the rack current requirements with the existing circuit breaker capacity
• To match the rack cooling requirements with the existing facility cooling capability
For more information about input power derating, see Appendix C.
Note: In this document, derating the input power budget means not using the maximum rated
input power values for the power supply. Compaq strongly recommends that the derated
power budget satisfies all the installation requirements, including future upgrade plans.
Refer to the Compaq ProLiant DL320 QuickSpecs for detailed specifications and options for the
ProLiant DL320 server.
References
Sources referenced in this paper are listed in Table 3.
Table 3. Sources of information
Topic Where to Find
Information focal point for the Compaq
ProLiant DL320 server
www.compaq.com/proliant
ProLiant DL320 server specifications, options, and
a list of other Compaq products and options
compatible with the ProLiant DL320 server
Compaq ProLiant DL320 QuickSpecs
Installation and servicing guidelines for the
ProLiant DL320 server
Compaq ProLiant DL320 Setup and Installation Guide, P/N
203836-001
Compaq ProLiant DL320 Maintenance and Service Guide, P/N
203834-001
Installation of Sliding Rail option kit Sliding Rails and Cable Management Solution Guide for
ProLiant DL360 and DL320 Servers, P/N 169549-002
Installation of vertical-mount PDU brackets and
Y-cables
Vertical-Mount PDU Brackets kit, P/N 191265-B21
Vertical-Mount PDU Brackets with High Voltage Cables kit, P/N
166097-B21
Installation guidelines for the ProLiant DL320
server in third-party racks
Compaq Ultra-Dense Server Deployment in Third-party Cabinet
Racks, Document Number 12CU-0400A-WWEN
Third-Party Rack kit, P/N 174574-B21
Installation guidelines for the ProLiant DL320
server in telecommunications (Telco) racks
Compaq Ultra-Dense Server Deployment in
Telecommunications (Telco) Racks, Document number 12CZ-
0400A-WWEN
Telco Rack kit, P/N 174576-B21
Customer advisory on 9000-series racks casters Customer Advisory: Caster wheels on 9000 Series Racks May
Break When Moved Under Load,
Document number EX991108_CW01