Compaq ProLiant DL320 Ultra-Dense Server Deployment in Compaq Racks

Compaq ProLiant DL320 Ultra-Dense Server Deployment in Compaq Racks 43

13AS-0900A-WWEN

Measured Input Power

Table 21 lists the measured input power of the ProLiant DL320 with varying subsystem

components to illustrate the effects of adding or removing optional components. The “peak” and

“typical” input power values were measured during power-up and idle/normal operations,

respectively.

Table 21. Measured input power for selected server configurations

Configuration

Number

ProLiant DL320 Configuration Power Input

Typical/Peak

0 Base model with no processor, HDD, or memory (for calculation only) 46 W/51 W

1 1x800 MHz, 1x128 MB, 0xHDD (minimum configuration) 70 W/80 W

2 1x800 MHz, 1x128 MB, 1x18.2 (standard configuration) 93 W/118 W

3 1x933 MHz, 4x512 MB, 2x18.2 GB, SA431 (maximum released

configuration)

135 W/189 W

4 1x933 MHz, 4x512 MB, 2x18.2 GB, 25W PCI Load Card (maximum tested

configuration)

151 W/200 W

Table 21 lists the input power of each subsystem component.

Table 22. Measured input power for subsystem components

Subsystem Components Power Input

Typical/Peak

Intel Pentium III 800-MHz Processor 23 W/26 W

Intel Pentium III 933-MHz Processor 28 W/30 W

128-MB DIMM 1 W/3 W

256-MB DIMM 1 W/3 W

512-MB DIMM 1 W/4 W

9.1-GB HDD 20 W/35 W

18.2-GB HDD 24 W/38 W

Remote Insight Lights-Out Edition 9 W/11 W

SA431 9 W/16 W

SA5300 25 W/27 W

Note: DIMM and HDD input power may vary depending on the component and drive

manufacturer.

Note: Compaq plans to support the SA5300 for the ProLiant DL320 in the 1

quarter of 2001.