Compaq ProLiant DL320 Ultra-Dense Server Deployment in Compaq Racks

Compaq ProLiant DL320 Ultra-Dense Server Deployment in Compaq Racks 37
13AS-0900A-WWEN
Appendix B -- Parts Reference
The parts referenced in this white paper are listed in this appendix. Refer to
Compaq ProLiant DL320 Quickspecs for more option parts.
Note: In this appendix, the notation Int’l (or) International is used for a part number for the
countries not explicitly listed for that part. The other notations are as follow:
APD Asia Pacific
EURO Europe
N.A. North America (including U.S., Canada, Mexico)
U.K. United Kingdom
Table 17. Power management
Power Management
Power part Compaq P/N Notes
Vertical-Mount PDU Brackets Option kit 191265-B21 8 brackets
Vertical-Mount PDU Brackets Option with High
Voltage Cables kit
166097-B21 4 brackets and 11 Y-power cords
Each Y-power cord is 10 ft in length (6-ft
single-section and 4-ft dual-sections).
These cables are not available
separately from this option kit.
10A IEC to IEC cable kit 6 ft / 2.0 m
8 ft / 2.5 m
12 ft / 3.0 m
142257-001
142257-002
142257-003
The IEC-to-IEC cables can be used
either as individual power cords for the
server or to extend the length of the
high-voltage Y-cables. The cables are
available in 6-, 8- and 10- ft lengths. The
ProLiant DL320 ships with one 10-ft IEC-
to-IEC cable, part number 142257-003.
Table 18. Console management
Console Management
Part Compaq P/N Notes
TFT5000R Flat Panel Monitor N.A.
Japan
120207-001
120207-291
TFT5000R Flat Panel Monitor International 120207-B31
Server Console Switch 1x8-port (100-230VAC). N.A.
International
Japan
400337-001
400337-B31
400337-291
The power cord shipped with this
switch is for low-voltage PDUs. High-
voltage PDUs may use the Y-cables
included in the Vertical-Mount
Bracket kit.
continued