HP ProLiant DL320s Server Maintenance and Service Guide

Removal and replacement procedures 35
4.
On the failed system board, close the processor retaining latch and the processor socket retaining
bracket.
5. Clean the old thermal grease from the heatsink and the top of the processor with the alcohol swab.
Allow the alcohol to evaporate before continuing.
6. Apply all the grease to the top of the processor in one of the following patterns to ensure even
distribution.
CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the
heatsink is removed from the processor after it has been installed.
7. Install the heatsink ("Heatsink" on page 28).
IMPORTANT: To ensure proper cooling, be sure the processor air baffle is installed at all times
(if applicable).
8. Install all components removed from the failed system board.