ProLiant DL320 Generation 3 Server User Guide

90 HP ProLiant DL320 Generation 3 Server User Guide
Server fault indications flowchart
Symptoms:
• Server boots, but a fault event is reported by Insight Management Agents (on
page 60
)
• Server boots, but the internal health LED is red or amber
Possible causes:
• Improperly seated or faulty internal or external component
• Unsupported component installed
• Redundancy failure
• System overtemperature condition
Item Refer to
1 "Management Agents (on page 60)"
2 • "Integrated Management Log (on page 64)"
• "Event List Error Messages" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD
or on the HP website (http://www.hp.com/support).
3 Server user guide or setup and installation guide, located on
the Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms
)
4 System Management Homepage
(http://h18013.www1.hp.com/products/servers/management/ag
ents/index.html)
5 "Power-On Problems ("Power-on problems flowchart" on page
82
)"
6 • "Hard Drive Problems" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD
or on the HP website (http://www.hp.com/support
).
• Server maintenance and service guide, located on the
Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms
)
7 "HP Insight Diagnostics (on page 64)"