HP ProLiant Intel-based 100-series G6 servers

The h1000 G6 chassis design includes the following:
 Up to four independent ProLiant DL170h half-width server nodes, each using two Xeon 5500 or
5600 Series processors and 16 DDR3 DIMM slots
 Choice of up to 16 small form factor (SFF) or 8 large form factor (LFF) hard disk drives
 Expanded PCIe Riser Options for 2-node configurations (half-width boards) requiring additional I/O
 HP Common Slot and industry-standard power supply options (all nodes share redundant power
across the chassis)
Shared power
The DL1000
system shares power supplies and thermal management across all nodes. Figure 8
displays the four server node configuration.
Figure 8. DL1000 fou
r node configuration – rear chassis view
Four node 2U
configuration
Redundant
power
Riser options
Three PCI
e riser options are available for half-width servers. Available space in the h1000 chassis
limits the riser options to two-node configurations only. The riser boards support both full and half
length PCIe 2.0 cards (Figure 9).
Figure 9. 2U riser options
Half length riser
Full length riser
27