HP ProLiant DL180 Server Software Configuration Guide

Contents 67
Follow the prompt to add a new local user account, then click Next to continue.
Release Note
Review the release notes, then click Next to continue.
Hardware Configuration
Review the default hardware settings and modify them as necessary, then click Next to continue.
Installation Completed
Click Finish to reboot the system and proceed to the login window
Installing Sun Solaris 10
Perform the procedures in this section to install Sun Solaris 10 to your ProLiant server.
Pre-installation instructions
1. Complete the NOS pre-installation procedures listed on page 52.
2. Have the following installation requirements on hand:
○ HP ProLiant DL180 Server Support CD
○ Sun Solaris 10 Update 1 DVD
NOTE: You must first install a DVD-compatible optical media drive on your ProLiant server before
installing Sun Solaris 10.
○ A Windows PC that has a:
− Floppy drive
− Optical media drive
− Browser that supports HTML
○ Two or more clients for testing purposes (optional)
Installation flow
1. Install Sun Solaris 10.
Refer to the next section for detailed instructions.
2. Install additional HP accessories.
The HP ProLiant DL180 Server Support CD includes the drivers for accessories compatible to
your server.
Refer to the product manual enclosed with the accessory for the detailed installation procedure
and/or to the attached readme.txt file associated with the driver. The readme.txt file can be
found on the appropriate driver diskette.
Sun Solaris 10 installation
Section 1. Launching the Sun Solaris10 installer
1. Turn on the server and insert the Sun Solaris 10 DVD.
2. Reboot the system to the SS10U1 DVD.