HP ProLiant DL180 Server Software Configuration Guide

Contents 48
Table 27 Checkpoint codes
9Ch Set up power management
9Dh Initialize security engine (optional)
9Eh Enable hardware interrupts
9Fh Determine number of SATA or SAS drives
A0h Set time of day
A2h Check key lock
A4h Initialize typematic rate
A8h Erase F10 prompt
AAh Scan for F10 key stroke
ACh Enter Setup
AEh Clear boot flag
B0h Check for errors
B1h Inform ROM pilot about the end of POST
B2h POST done, prepare to boot operating system
B3h Store extended CMOS
B4h 1 One short beep before boot
B5h Terminate quiet boot (optional)
B6h Check password (optional)
B7h Initialize ACPI BIOS
B9h Prepare boot
BAh Initialize SMBIOS
BBh Initialize PnP option ROMs
BCh Clear parity checkers
BDh Display Multi-boot menu
BEh Clear screen (optional)
BFh Check virus and backup reminders
C0h Try to boot with INT 19
C1h Initialize POST Error Manager (PEM)
C2h Initialize error logging
C3h Initialize error display function
C4h Initialize system error handler
C5h PnP and dual CMOS (optional)