HP ProLiant DL180 Server Software Configuration Guide

Contents 23
Table 14
Serial Port Configuration submenu fields
Field Description Options
Serial Port
Assignment
This setting will assign the serial port connector to the system. This is the
default setting.
System
This setting will assign the serial port connector to the BMC (Baseboard
management controller
BMC
Serial Port Switching This setting allows the Serial port switch between system and BMC. This is the
default setting
Enabled
This setting will prevent the Serial port from switching between system and
BMC.
Disabled
Serial Port
Connection Mode
Serial port connection mode is Direct. This is the default setting Direct
Serial port connection mode is Modem Modem
Figure 18 LAN Configuration submenu
Table 15 LAN Configuration submenu fields
Field Description Options
Share NIC Mode Setting this value will prevent support from share NIC mode Disabled
Setting this value will allow support share NIC mode.(Disabled the KVM). Enabled
DHCP IP Source Setting this value will allow dynamic IP assignment. Enabled