HP ProLiant DL180 Server Software Configuration Guide

Contents 20
IPMI Configuration submenu
Figure 14 IPMI Configuration submenu
Table 12
IPMI Device Configuration submenu fields
Field Description
SEL Configuration Select SEL configuration in the left frame of the screen to go to the sub menu for that item.
Then you can press Enter to enter its sub-menu. You can display an about SEL Configuration
option by highlighting it using the<Arrow> keys.
Serial Port
Configuration
Select serial port configuration in the left frame of the screen to go to the sub menu for that
item. Then you can press Enter to enter its sub-menu. You can display an about Serial Port
Configuration option by highlighting it using the<Arrow> keys.
LAN Configuration Select set LAN configuration in the left frame of the screen to go to the sub menu for that item.
You can display an about LAN option by highlighting it using the<Arrow> keys. Set LAN
Setup options are described in this section. The Set LAN BIOS Setup screen is shown below
(When you have a LO100 Device, this item will display).
Watchdog
Configuration
Select watchdog configuration in the left frame of the screen and press<enter> to go to the
sub menu for that item. That will display POST Watchdog Timer Action, BMC Watch Dog
Time Out, you can change the default value.
Hardware health
information
Select Hardware health configuration in the left frame of the screen and press<enter> to go to
the sub menu for that item. That will display CPU temperature, ambient temperature, CPU fan
speed, system fan speed, chassis fan speed, these item can’t change by user, it accord with
the sense of the case.
Fan Control Policy Press Enter to access the related submenu. For details on the submenu options, see the “Fan
Control Policy submenu” section below.