HP ProLiant DL180 Server Software Configuration Guide

Contents 17
IO Device Configuration submenu
Figure 11 IO Device Configuration submenu
Table 10
IO Device Configuration submenu fields
Field Description Options
Serial Prot1
Address
Set this value to prevent the serial port from accessing any system resources.
When this option is set to Disabled, the serial port physically becomes unavailable
Disabled
Set this value to allow the serial port to use 3F8 as its I/O port address and IRQ 4
for the interrupt address. This is the default setting. The majority of serial port 1 or
COM1 ports on computer systems use IRQ4 and I/O Port 3F8 as the standard
setting. The most common serial device connected to this port is a mouse. If the
system will not use a serial device, it is best to set this port to Disabled.
3F8/IRQ4
Set this value to allow the serial port to use 2F8 as its I/O port address and IRQ 3
for the interrupt address. If the system will not use a serial device, it is best to set
this port to Disabled.
2F8/IRQ3
Set this value to allow the serial port to use 3E8 as its I/O port address and IRQ 4
for the interrupt address. If the system will not use a serial device, it is best to set
this port to Disabled.
3E8/IRQ4
Set this value to allow the serial port to use 2E8 as its I/O port address and IRQ 3
for the interrupt address. If the system will not use a serial device, it is best to set
this port to Disabled.
2E8/IRQ3