HP ProLiant DL180 Server Software Configuration Guide

Contents 10
Table 3 Boot Settings Configuration submenu fields
Field Description Options
Summary Screen Set this value to not allow display hardware summary screen before booting the
OS.
Disabled
Set this value to allow display s hardware summary screen before booting the OS Enabled
Boot up Num-
Lock
Set this value to allow the Number Lock on the keyboard to be enabled
automatically when the computer system is boot up. This allows the immediate use
of 10-keys numeric keypad located on the right side of the keyboard. To confirm
this, the Number Lock LED light on the keyboard will be lit.
Enabled
This option does not enable the keyboard Number Lock automatically. To use the
10-keys on the keyboard, press the Number Lock key located on the upper left-
hand corner of the 10-key pad. The Number Lock LED on the keyboard will light
up when the Number Lock is engaged. This is the default setting
Disabled
POST F1 Prompt Set this value to allow wait up to 15 seconds for press F1. Delayed
Set this value to allow wait indefinitely for press F1. Enabled
Set this value to do not wait for F1; continue booting. Disabled
Restore on AC
Power Loss
Set this value to keep power off until the power button is pressed. Stay Off
Set this value to restore previous power state before loss occurred. Last State
Advanced menu
Figure 5 Advanced menu
NOTE: The CPU Configuration setup screen varies depending on the installed processor.