HP ProLiant DL165 G7 Server Software Configuration Guide

System BIOS configuration 24
Remote Access Configuration submenu
Figure 20 Remote Access Configuration submenu
Table 18 Remote Access Configuration submenu fields
Field Description Options
Bios Serial Console
Port
Select Serial Port for console redirection.
Make sure the selected port is enabled.
COM1
Disable the Serial Port for console redirection. Disabled
BIOS Serial Console
Baud Rate
Set the BIOS Serial Console Baud Rate. 09600 8,n,1
Set the BIOS Serial Console Baud Rate. 19200 8,n,1
Set the BIOS Serial Console Baud Rate. 57600 8,n,1
Set the BIOS Serial Console Baud Rate. 115200 8,n,1
Flow Control Select Flow Control settings for console redirection. This item
disappears when Remote Access is disabled. This is the default
setting.
None
Select Flow Control settings for console redirection. This item
disappears when Remote Access is disabled.
Hardware
Select Flow Control settings for console redirection. This item
disappears when Remote Access is disabled.
Software
Redirection After
BIOS POST
Turn off the redirection after POST. Disabled
Redirection is active during POST and during Boot Loader. Boot Loader
Redirection is always active. (Some OSes may not work if set to
Always) This is the default setting.
Always