HP ProLiant DL165 G6 Server Software Configuration Guide

NOS installation 46
Section 6. Installing additional HP accessories
The HP ProLiant DL165 G6 Server Support CD includes the drivers for accessories compatible to your
server.
Refer to the product manual enclosed with the accessory for the detailed installation procedure
and/or to the attached readme.txt file associated with the driver. The readme.txt file can be
found on the appropriate driver diskette.
Installing Red Hat Enterprise Linux NOS
Installation flow
1. Install Red Hat Enterprise Linux [version]. For the specific procedure for each RHEL NOS version,
refer to the following sections.
2. Install additional HP accessories.
The HP ProLiant DL165 G6 Server Support CD includes the drivers for accessories compatible to
your server.
Refer to the product manual enclosed with the accessory for the detailed installation procedure
and/or to the attached readme.txt file associated with the driver. The readme.txt file can
be found on the appropriate driver diskette.
Pre-installation instructions
1. Complete the NOS pre-installation procedures.
2. Have the following installation requirements on hand:
○ HP ProLiant DL165 G6 Server Support CD
○ Red Hat Enterprise Linux CD-ROMs
− Red Hat Enterprise Linux 3 – 4 discs
− Red Hat Enterprise Linux 4 – 4 discs for the 32-bit version, 5 discs for the 64-bit version
○ A Windows PC that has a:
− Floppy drive
− Optical media drive
− Browser that supports HTML
○ Two or more clients for testing purposes (optional)
Red Hat Enterprise Linux 4 installation
The procedures in this section apply to all versions of the Red Hat Enterprise Linux 4 supported by
your ProLiant server. Refer to Table 22 for a list of these NOS versions.
NOTE: If the system has more than 4 GB of memory, the Red Hat Enterprise Linux installation
requires the pci=nommconf parameter.